>...the nameboard strip >was bowed in the center and the sharps were knocking on it...no anchor in >the middle of the >keyboard...I'm at a loss on how to fix this problem. Any >ideas.? Thanks Two ideas, Judy: 1) Turn the strip 180 degrees so the bow goes in the direction of the action. 2) Create an anchor in the middle of the strip by drilling a hole in the strip, a hole to match in two of the keys, and a long wood screw to hold it in place a way from the black keytops. Keith McGavern kam544@earthlink.net Registered Piano Technician Oklahoma Chapter 731 Piano Technicians Guild USA http://www.ptg.org/1999/conv/ PTG Convention, Kansas City, July
This PTG archive page provided courtesy of Moy Piano Service, LLC