Hi David, It's our main Canadian supplier of piano parts, based in Montreal. Saves a lot of hassle and expense, no Customs and faster supply. Regards Roger At 01:30 AM 14/02/99 +0000, you wrote: >Who or what is "Pianophile"? > >David Ilvedson, RPT > > >> Pianophile's pins are Japenese, and I have found them to be very good. >> I have ground down the sides of the tip of my wire cutters to form a flush >> cut, it works better than my expensive centre pin cutters. >> Do things in order e.g. remove all flange pins ream all bushings ect. >> Hope this helps >> Roger >> >> >> >> >> At 09:46 PM 10/02/99 -0600, you wrote: >> >Hi, >> > >> >Does anyone know a source of supply for pre cut and tumbled center pins? I >> >am going to be doing a *lot* of repinning very shortly on a piano and feel >> >that these pins would be the *very best* option for the client. >> >Regards, >> >Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. >> > >> >Tuner for the Saskatchewan Centre of the Arts >> > >> >drose@dlcwest.com >> >http://www.dlcwest.com/~drose/ >> >3004 Grant Rd. >> >REGINA, SK >> >S4S 5G7 >> >306-352-3620 or 1-888-29t-uner >> > >> Roger Jolly >> Baldwin Yamaha Piano Centre >> Saskatoon and Regina >> Saskatchewan, Canada. >> 306-665-0213 >> Fax 652-0505 >> >> >> >> >David Ilvedson, RPT >Pacifica, CA >ilvey@jps.net > Roger Jolly Baldwin Yamaha Piano Centre Saskatoon and Regina Saskatchewan, Canada. 306-665-0213 Fax 652-0505
This PTG archive page provided courtesy of Moy Piano Service, LLC