At 08:39 PM 1/26/99 -0800, you wrote: >Ron > I obtained some 9/32" x 36tpi from either Pacific piano or >Pianotek a few years ago. Depending on original profile you might >consider JB welding the walls, redrilling and re-tapping for 1/4" new >studs. That works every time. > >Dale Fox >foxpiano@juno.com Dale, Yep. by gosh, I can see where that would work every single time. If I'm going to have to modify the plate though, I'd be more likely to just drill and tap 5/16 for a brass insert 5/16 > 1/4. That'll work too, I can make what I need quickly and easily enough, and without dragging the plate all over town (ouch). I have a few days before I have to decide, so maybe some guy in a white hat will show up with some originals before I'm forced into it. Right! Thanks for the reply. Regards, Ron
This PTG archive page provided courtesy of Moy Piano Service, LLC