dale r fox wrote: > You might take a look at the newer Jet 14", 3/4" blade capacity saw. > Ball bearing guides, good true wheels, 3/4/hp motor. About $100 more > than the Delta 1/2" x 12" standard saw. > > Dale I agree. I recently got one of these with the 1 hp motor and it's a real honey. whatever you get make sure you also get a fence. It is a wonderful addition and I don't no what I would do without it. It's great for cutting your own veneer. Rob Goodale, RPT Las Vegas, NV
This PTG archive page provided courtesy of Moy Piano Service, LLC