In a message dated 12/9/99 9:04:13 PM !!!First Boot!!!, pianoserv440@juno.com writes: << What is/are your favorite methods/tool(s) for enlarging the recess that castors fit into on the bottom of pianos such as when fitting double wheel castors so the arm of the castor doesn't get hung up against the existing recess? I've used chisels and rotary files chucked into a drill for this - bad wording - I never chucked the chisels into a drill :-), but feel there has to be a better way. John Fortiner >> Good old muscle with hammer and chissle are the best. Willem
This PTG archive page provided courtesy of Moy Piano Service, LLC