You could try using an iron and a cotton rag. The iron will melt the wax through the rag which will soak up the wax...hopefully... David Ilvedson From: "Nancy McMillan" <nlm@csu.cted.net> To: <pianotech@ptg.org> Subject: Wax on keybed Date sent: Mon, 23 Aug 1999 11:00:37 -0700 Send reply to: pianotech@ptg.org > Hi all, > Encountered a grand piano today that previous tech applied wax to the keybed > glide bolt areas. Sticky mess to say the least. I scraped as much as I could > off without wood tear out. Can anyone recommend a solvent to clean the rest > off without raising the wood grain? > Thanks in advance, > Doug Mahard, Associate > > David Ilvedson, RPT Pacifica, CA ilvey@jps.net
This PTG archive page provided courtesy of Moy Piano Service, LLC