jack center pin bushing

A440A@AOL.COM A440A@AOL.COM
Fri, 13 Aug 1999 05:25:55 EDT


John writes:
>I don't know if Protek would have been a permanent repair for the flange
>with
>the black residue. That is why I chose to repin.

Greetings, 
    Me too.  I have, on the bench, the action from one of the earliest CF's.  
The dampers were leaky, and the cause is the underlevers freezing up.  All 
the pins had a black something on them,  and repinning is the only way I know 
that it will continue working.  Pro-tec didn't give lasting results on the 
same problem several years ago.  
Regards, 
Ed Foote


This PTG archive page provided courtesy of Moy Piano Service, LLC