Wim: If you did this stunt again, now that you have lots of experience, your score on the Tremper Stupidity Index would be at least a 7. Since you were just beginning you rate a 4. Let me know if you do it again. Fred On Fri, 6 Aug 1999 Wimblees@AOL.COM wrote: > I drill my pin block on the a drill press on the bench. I have a shelve that > sits at a 7 degree angle. On one of my first pin block drilling jobs, instead > of starting at the treble end, which would give all the pins the correct > angle, I started at the bass end. I got about 3/4 of the way through before I > realized what I was doing. > > As I said, that was about the second or third pin block I did. I still have > it, just as a reminder > > Willem > ------------------------------------------------------------------------------ Fred W. Tremper, RPT Morehead State University Morehead, KY 40351 f.trempe@morehead-st.edu ------------------------------------------------------------------------------
This PTG archive page provided courtesy of Moy Piano Service, LLC