Newton: On the Tremper Stupidity Index (from 1 to 10) I would rate that as a 5, maybe 6. Fred On Thu, 5 Aug 1999, Newton Hunt wrote: > Here is my stupid man trick. > > I bored, tapered and shaped a set of hammers for a grand. I was > fitting the hammers to the shanks when I realized I had bored the > middle section at the same right hand bore angle as the bass. > > After I stopped kicking, screaming and swearing I took a careful look > and decided there was enough wood left to reshape the tails so I > plugged the holes, drilled them again using the inside flat for > orientation and reshaped the tails. Worked well. I learned to mark > my drilling fixtures with a BIG "B" and a BIG "T" so I would not do it > again, maybe. > > Ok, now you can laugh. > > Newton > ------------------------------------------------------------------------------ Fred W. Tremper, RPT Morehead State University Morehead, KY 40351 f.trempe@morehead-st.edu ------------------------------------------------------------------------------
This PTG archive page provided courtesy of Moy Piano Service, LLC