----- Original Message ----- From: John Gunderson <jgunderson@monmouth.com> To: <pianotech@ptg.org> Sent: Wednesday, August 04, 1999 5:55 AM Subject: bass string design > Thanks to all for the input. I think that Del Fandrich provided the answer I > was looking for, that being that there is an optimum proportion of core > diameter to o/a diameter. Thinking about it, it make sense that as you bend a > wrapping around a core you are stressing the outter fibers of the wrapping. The > tighter the bend, the greater the stress. Eventually a point is reached where > the fiber structure is damaged and the wrapping is no good. The two factors in > how tight you are "bending" are the core diameter (circumference) and the > wrapping radius (distance from the center). > > Thanks again for the advice... Back to the drawing board. JHG > > > John Gunderson, Associate Member, North Jersey Chapter > ---------------------------------------------- John, That wasn't given as an "optimum." More like a maximum. I'm still working on the optimum part. Del
This PTG archive page provided courtesy of Moy Piano Service, LLC