Glue for Kawai plastic

[Don Mannino]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
John,

The best thing I can recommend is Hot Stuff gap filling glue. It will =
grab the ABS fine, and will give you a little time to settle the dampers =
in position. Just be sure you have the solvent handy so that you don't =
become an accessory item permanently fastened to the action, and be sure =
the damper is well aligned before you move on to the next note.

PVC-E works well for gluing felt and wood to ABS, but I have not tried =
it for ABS to ABS - let me know if you do try it.

Don Mannino
  -----Original Message-----
  From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On =
Behalf Of John Freeman
  Sent: Friday, April 23, 1999 3:24 PM
  To: pianotech@ptg.org
  Subject: Glue for Kawai plastic=20


  Hi:=20
  I am back on this list.  I would like an opinion from a piano tech who =
has experience with glueing plastic dampers to plastic damper wire =
blocks.  What is the best glue for this purpose.  I have a whole set to =
replace on a piano which was vandalized in a University practice room.  =
The whole set of dampers and damper levers were torn to pieces along =
with about half of the hammer butts, shanks and hammers..  I have been =
off the list for a while as my modem went bad and I also changed my IP =
account.  Thanks in advance,   John Freeman

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/2d/dd/28/f1/attachment.htm

---------------------- multipart/alternative attachment--