List, Joe's jig is really great for travelling hammers. I just got mine last week. Have you upgraded the system already? I'd love some new clips, when you get them made. Thanks, Jeannie Jeannie Grassi, RPT mailto:jgrassi@silverlink.net Bainbridge Island, WA >> List, the first clips were just two clothes pins cut down and > two 26 gauge > piano wire feet were > glued on the ends to hold the travel bar under the hammer shanks. The > design was good on the first batch that were made however > they were hard to > install in position to hold the bar. > The last batch of clothe pins all showed a serious weakness > in design, they > all tended to want to do the twist and jump the tracks. So > back to the > drawing board and two days later Eureka, > The new clip holds two hammers side by side (the only hammers > that need to > be traveled with a straight edge) and are very easy to > install to hold the > travel bar. >
This PTG archive page provided courtesy of Moy Piano Service, LLC