Thank you very much Paul S. Larudee for your excellent explaination. It certainly made some questions I had about Protek more clear. Antares >"Verdigris" is a Languedoc word (Provencal, spoken in southern France, >is a modern descendant of Languedoc) which best translates as "grayish >green." It is rust - specifically corroded copper, which is one of the >metals in the alloy used for center pins - and can be caused by >corrosive agents like sulfur or chlorine. Since rust is porous, it can >absorb other substances like the lubricants used to treat (or mistreat) >action centers, or whatever chemicals may remain or have been >deliberately introduced into the bushing cloth. A chemical reaction can >sometimes take place between these substances and the corrosive agents, >the result of which is usually a thickening of the substances. > >Polymers are highly stable long-chain molecules which for all practical >purposes will react with almost no chemical, and certainly not with >anything encountered in action centers or anywhere else in the piano. >Their only effect is to reduce the friction of whatever they coat. >Protek CLP therefore makes the corrosion and whatever other gunk (an >esoteric technical term) may be there slipperier than it would otherwise >have been. Furthermore, the slipperiness is long term, because of the >stability of the polymers. > >Probably more than anyone wanted to know. > >Paul S. Larudee, RPT >Richmond, CA >
This PTG archive page provided courtesy of Moy Piano Service, LLC