Make a scale stick for registering so all may be removed and tapered/graduated within the desired weight range. Jon Page At 10:33 AM 4/13/99 +0000, you wrote: > > >A440A@aol.com wrote: > >> Greetings, >> . If you want >> the job to go fastest, remove all hammers with their shanks, get an accurate >> scale, and reduce them all. > >Do them in two groups, (every other hammer taken off to form each group) and it >will save alot of time hammer spacing. >-Mike >
This PTG archive page provided courtesy of Moy Piano Service, LLC