I'd bet dollars to doughnuts that the sounding board is as dead as a doornail. S&S 40" verticals develop this problem around here. Jon Page At 11:39 AM 4/9/99 -0400, you wrote: >Dear List, > >I have no idea of the value of this piano. Would anyone care to give me >some rough estimates? > >Over the years I have become very familiar with the value of lesser quality >pianos. However, this is the very first Steinway console I have ever seen. > It needs a minor regulation, some felt removed from the hammers, and many >center pins have too much friction. The cabinet is a Queen Anne walnut and >shows normal oxidation wear - no scratches. The sound is not as good as a >Kawai or Yamaha of comparable size. But I assume that the Steinway name >brings more $$. > >Also - thanks to those who responded to my query last week concerning a >Vose grand where the tuning pins were very loose and the plate holes were >not large enough to introduce larger pins. The pins indeed were tapered, >as two of you thought, and tapping them in slightly produced excellent >results. > >Paul Plumb, B.Mus., >Plumb Pianos >
This PTG archive page provided courtesy of Moy Piano Service, LLC