Is that why Apsco sends out a bridge pin drill bit that's actually makes a hole bigger than the pin? Now I understand! I've seen whole pianos done in #7's though. But wow, those #10's are like humungus! Good luck, Brian Ron Nossaman wrote: > At 11:15 PM 4/6/99 -0700, you wrote: > >#7's thru the top two sections. > >#8's thru the rest of the tenor. > >#9's thru the bi-chords. > >#10's thru the mono-chords. > >Don't ask me why. They work. > > > >Del > > > > Oops, forgot to mention the *real* reason I don't like #6 pins. The darn > things are too hard to install without bending them. Maybe that means I've > finally got a big enough hammer. <G> > > Thanks for the reply. > Ron
This PTG archive page provided courtesy of Moy Piano Service, LLC