Dick, Does pin size ie. 0 to 4, make a difference in the length of wire needed? Joe ---------- > From: rbeaton <rbeaton@initco.net> > To: pianotech@ptg.org > Subject: Re: Restringing just the bass > Date: Thursday, May 28, 1998 4:05 PM > > Jon.. > Thanks for the clarification....just note, however that piano tuners must > have the same size fingers!!!! I think they are saying 3 inches for the > wire that makes the coil. > Dick RPT MT > ---------- > > From: Jon Page <jpage@capecod.net> > > To: pianotech@ptg.org > > Subject: Re: Restringing just the bass > > Date: Thursday, June 11, 1998 6:00 PM > > > > At 05:13 AM 5/28/98 -0600, you wrote: > > >Jon... > > >When you say" cut the pin 1/4 inch below the hole"...do you mean saw it > > >off...thus making a short dummy pin??? > > >Dick RPT MT >
This PTG archive page provided courtesy of Moy Piano Service, LLC