Another question, I was wondering... Could anyone suggest a way to remove wood from the bottom of ivory key tops? Over the last several years I have been removing and collecting ivory from old junk pianos. I really have quite an impressive collection now, numerous shades and easily enough to recover the keys on several pianos or more. One problem, however, is that quite often some wood comes off with the ivory when removed. I have tried all types of scraping, sanding, grinding, what have you. This usually results in breaking the key top or gouging it so that the bottom is no longer even. I'm afraid of using any kind of chemical for fear that it will either warp or otherwise damage the ivory. It would sure be nice to get all these keys cleaned off so that they are usable. Ideas? Rob Goodale, RPT
This PTG archive page provided courtesy of Moy Piano Service, LLC