I made a brace for the lyre. It involved a turnbuckle and was placed diagonally between the top of the treble leg and the top of the lyre box. It worked well for a long time and even impressed the movers on a 9' Chickering. Unfortunately the metal to wood epoxy joint failed and I never made another one. No, it wasn'r during a moving attempt; I was lucky - I dropped it on a concrete floor. Like I said, lucky. I would make another one without the wood. When I have the time and ambition at the same time. Jon Page At 03:14 AM 7/5/98 EDT, you wrote: >In a message dated 98-07-05 01:45:43 EDT, you write: > >> As I rolled the piano up on it's leggs >> (sorry Deb) I learned what happens when a lyre snaps and breaks. > >>Lar > >The local movers just love to give me crap about rolling pianos up over the >lyre. But hey, nobody else is around when its time to set the piano up after >an install, so how else am I supposed to do it? I've used this method on >pianos up to 6'3" and have never had any problem, but I suppose it is just a >matter of time. I don't envy your experience, it must have been an extremely >unpleasant event. I think I'll double check lyres in the future. Makes me >think of the time that a mild mannered baptist minister tuner I know was >pitch raising a Meisner vertical one morning when the plate exploded. He >quietly packed up his stuff, drove home, laundered his drawers, and went to >bed for the rest of the day. And they say there is no drama in piano service. > >Have a good one > >Dave > >
This PTG archive page provided courtesy of Moy Piano Service, LLC