> From: Billbrpt <Billbrpt@aol.com> > Date: Thu, 30 Apr 1998 08:52:21 EDT > To: pianotech@ptg.org > Subject: Re: TP coils > Reply-to: pianotech@ptg.org > More than one manufacturer of low cost pianos did this and yes, you are right, > it makes the coil difficult to remove later. I believe the reason and the > advantage for doing this however was that it created a perfect 90º bend in the > becket (spelled according to the latest recommendation from Jim) on the other > side which did not require a closure technique. For this reason, it was a > worthy and good practice. Of course don't do that when taking the PTG Technical Exam. You will lose a few points and it really is ugly. > I even occasionally use this technique myself in a difficult situation > such as when I have spliced a string. If the wire protrudes through to the > other side and is bent over, the bend where the coil starts will be perfect > and will not creep out or distort. This can help make what coil you have be > secure in the occasion difficult situation even though it does not appear very > craftsmanlike and generally would be frowned upon. > > Bill Bremmer RPT > Madison, Wisconsin David Ilvedson, RPT Pacifica, CA ilvey@a.crl.com
This PTG archive page provided courtesy of Moy Piano Service, LLC