Gluing understringing felt

[Jon Page]

Cold hide glue.  Coat the plate surface and let it get tacky.
Apply to the felt also, secure with masking tape (remove carefully).

Jon Page

At 10:09 AM 4/2/98 +0100, you wrote:
>I've researched the archives regarding burnt shellac. If it were
>something that I could pick up at my local home center/hardward store, I
>would be inclinced to use it. What would be an acceptable alternative
>for gluing understringing felt to the plate (old upright). How about
>PVC-E or auto weather-stripping contact cement?
>
>Thanks in advance.
>
>-- 
>Jerry Hunt
>Dallas, TX USA
>Associate member PTG
>
>