Unless they come out when removing the pins, or are thrashed when redrilling, reaming, wire brushing, or pounding the new pins in. ---------- > From: Vince Mrykalo <vince@byu.edu> > To: pianotech@ptg.org > Subject: Re: Tuning pin bushings > Date: Wednesday, April 01, 1998 11:16 AM > > No. > > At 08:43 AM 4/1/98 -0600, you wrote: > >Yet another question regarding re-stringing (and replacing the tuning > >pins). Is there any compelling reason why the pin bushings should be > >replaced? > > >Jerry Hunt > >Dallas, TX > >Associate member PTG > > > Vince Mrykalo RPT > ~~~~~~~~~~~~~~~~~~ > vince@byu.edu
This PTG archive page provided courtesy of Moy Piano Service, LLC