---------- > From: Delwin D Fandrich <pianobuilders@olynet.com> > To: pianotech@ptg.org > Subject: Re: glueing controversy > Date: Monday, September 15, 1997 1:14 AM > > Richard Moody wrote: > > > > Since no one has mentioned it, I have heard that another > > consideration for using hide glue for hammers is that not as much > > moisture is absorbed into the hammer shank upon drying. That the > > water soluble liquid "white" glues including tight bond dry by > > evaporation and absorbtion of water from the glue to the wood. This > > could cause warping or twisting of the hammer shank. > > Richard, > > So does animal hide glue. The solvent for hide glue is water. > > --ddf True but also there is the heat factor. This may mean there is more evaproation than absorbtion in hide glue. By deduction, less absorbtion into the wood, less effects from moisture increase in the wood. However research might find absorbtion rates and resulting EMC (equalized moisture content) in wood of the different glues. Until then I bet that hide glue gives less moisture to wood than the cold, water soluble glues. Of course that still might not make enough of a difference to matter. ( I bet on that also) rm
This PTG archive page provided courtesy of Moy Piano Service, LLC