These are .25 inch. Actually the .25 inch socket on your cordless screwdriver will fit them just fine. dave BSimon1234@aol.com wrote: > > I have to go and replace the rubber grommets on a late 70's Baldwin spinet. > It has little plastic nuts on the spinet wires, then a felt washer, then the > rubber grommets that stick into the key fork. They have hardened and are now > clicking badly. > > Does anyone know the size of the plastic nut that adjusts the lost motion? - > I haven't seen the piano for a year but I think they are about 1/4", possibly > less. I want to be sure I have the right tools. I plan to stick a nut driver > into a battery operated drill or screwdriver and spin the nuts off, replace > the rubber grommets, and then spin them back on. > > Anyone have a better way of changing these out? And, -how long have you > found that this operation to take? > > Thanks, > B. Simon > Phoenix -- _______________________________________________ David M. Porritt, RPT Meadows School of the Arts Southern Methodist University Dallas, Texas _______________________________________________
This PTG archive page provided courtesy of Moy Piano Service, LLC