PTG LOGO

[Michel Lachance]

pianoman wrote:
> 
> ----------
> From: Glenn <rockymtn@sprynet.com>
> To: pianotech@ptg.org
> Subject: PTG LOGO
> Date: Wednesday, September 03, 1997 4:04 PM
> 
>  I scanned the PTG logo from the logo sheet the PTG provides but it is
> still
> a bit fuzzy.  Does someone have a "pure, clean" ptg image?  I make my own
> business cards and flyers.  The image comes out about around one to two
> inches.  I use the "associate member" image.
> 
> If you e-mail it as an attachment, be sure NOT to send it through the list.
>  It will be rejected.
> 
> Thanks,
> 
> Glenn.
> Glen,
> Years ago we were able to purchase from the home office the logo on the
> printers stamp (on a piece of rectangular metal) which the printer could
> use to print business cards and the like.  Perhaps you can contact them and
> see if you can buy the thing.
> James Grebe
> pianoman@inlink.com

I solved the problems long time ago.  I redraw the LOGO using the 
original Bauer Bodoni font with the same parameters (I used a scanned 
image as a template).  My logo is now in Postscript vectorial format and 
can be enlarged as big as wall without any jag.

Michel Lachance, RPT