Hi all, If necessary add an *over dampher*...like the ones on a Yamaha U3H At 09:46 AM 11/8/97 -0700, you wrote: >Les.. >I've had the same experience with a Kimball. There is no cure for that >thing! The dampers hit the wrong place on the strings...a >node...so the only possible cure is to move the dampers up, but that will >be in the way of the hammer, so it is a lousy piano design. >Dick RPT > >---------- >> From: Leslie W Bartlett <lesbart@juno.com> >> To: pianotech@ptg.org >> Subject: after-ring >> Date: Friday, November 07, 1997 1:00 PM >> >> List: >> >> I sort of tuned a Kimball console this morning that had a slight >> "after-ring" when playing A-440. All dampers "seemed" to be mating the >> strings correctly. When I pushed the A-440 damper tightly against the >> three strings, it did NOT diminish the after ring. I went up-n-down the >> strings, placing hand on them, hoping to find the offending note, but >> didn't. >> >> What next? >> >> Thanks >> >> Leslie >> lesbart@juno.com >> "I've given up my search for truth. I'm now looking for a fairy >> godmother." > > Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. "Tuner for the Centre of the Arts" drose@dlcwest.com 3004 Grant Rd. REGINA, SK S4S 5G7 306-352-3620 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC