after-ring

[David ilvedson]

> To:            pianotech@ptg.org
> Date:          Fri, 7 Nov 1997 23:04:45 -0500
> Subject:       after-ring
> From:          rmartin30@juno.com (ralph m martin)
> Reply-to:      pianotech@ptg.org

Just a tip...read and re-read Bill Spurlock's articles on 
upright damper replacement in the PTG Journal.  He makes his own 
bass dampers (which I do now) with the length of 2 & 3/8" 
seemingly the optimum length.  There is a lot of very useful 
information in those two articles.

David ilvedson, RPT
Pacifica, CA


> Leslie and all
> 
> I just remembered a similar case a couple of years ago. It was a new
> Balwin console and Kent Webb of Baldwin advised me to replace the damper
> s with Hamilton dampers. He said that they were larger and would do the
> job.....They did!
> 
> just an after thought
> 
> Ralph Martin
> 
>