was written... >Many spinets that have plastic lifter elbows, have other > plastic parts, and do not necessarily break unless VERY good point, the OTHER plastic parts. So you replace the elbows and the piano gets played for the first time in years. Then in a few days it isn't playing any more because other parts you never mentioned (because you didn't know about them) are breaking. (or you are a pounding tuner and discover this before the client) Don't let this happen to you. Ever tighten screws and that's how you find brittle plastic flanges? (sorry forgot the brand) Make sure you are well versed in disclaimers before charging more than $300 for work done to a piano musically not worth $200. ANY piano with plastic parts must be thoroughly inspected for OTHER plastic parts before you recommend replacing broken ones. There goes one hour. (including the explaination of non-recommendation) (or roughy 20% of the afore-mentioned instrument's legal value) Richard Moody (the "ic" stands for the "tic" in plastic.) ---------- > From: DGPEAKE@aol.com > To: pianotech@ptg.org > Subject: Re: Was Repair and rebuilding > Date: Monday, June 09, 1997 5:42 PM > > There I times I replace lifter elbows in the piano, other times when I do it > on the bench. Many spinets that have plastic lifter elbows, have other > plastic parts, and do not necessarily break unless you remove the action. > Unless the customer willing pay to have all of the plastic parts replace > which can be expensive, I would rather replace the lifter elbows with the > action in the piano. At least she will have 88 working keys. > > Dave Peake, RPT
This PTG archive page provided courtesy of Moy Piano Service, LLC