---------- > From: Elian Degen <degen@telcel.net.ve> > To: pianotech@ptg.org > Subject: Lindner Piano ??? > Date: Tuesday, July 01, 1997 5:26 PM > > List: > > Does any of you know a piano named Lindner ? > > I had a call last week to tune an old piano with minor problems !!! > I went to the customer's house today, and she shows me a beautiful piano. > she tells me it is 30 years old and she would like to know what would cost > to tune and repair. First thing I notice when I open the lid is the > keyboard, all the keys are out of position. and the Brand name: LINDNER > Shannon, Ireland. > I proceeded to open the piano, and guess........... Its all plastic made, > The only wood it seems to be in the case ( and I'm starting to doubt it ) > The rest is all plastic, except the hammers. The keybed is made of two > aluminum rails, the key is plastic and the center instead of a centerpin > has a piece of flat spring attached to a plastic molding, that goes glued > to the aluminum rail. The escapement system is plastic. backcheks plastic, > bridlestraps (no such thing), they used a piece of cotton string glued in > both sides. > > Probably because of its age all plastic parts crystallized and they are > braking same as the plastic elbows in spinet pianos. > > My first reaction was to tell the lady to throw away that thing, but I > remembered the list, and being polite I told her I would check if anything > can be done... > > Any of you has ever stumbled upon an instrument alike ? > Do you know if that factory still exist ? > Or is it wise to tell the customer to throw it away in order to save my > life ? > > Dear Elian, Throw it away. It was made with exploding plastic parts and there are none available James Grebe pianoman@inlink.com > > > Elian Degen degen@telcel.net.ve
This PTG archive page provided courtesy of Moy Piano Service, LLC