List and David Yes, lacquer will bond quite nicely to poly, but you need to make sure that you have done all your repair and levelled it well with a block, then wet sand the remaining poly to 600 or so. Remember also to clean your surface well before spraying to prevent fish eye. If you are going high polish with lac, try to do as much levelling and prepping before you spray as possible. This will prevent shrinkage into any dips or imperfections. If you want to repair w/ poly, use a filler to take up most of the damage, then pour poly. Hope this helps David David C. Brown RPT School of Music The University of Texas at Austin dcbrown@mail.utexas.edu
This PTG archive page provided courtesy of Moy Piano Service, LLC