Replaced Keytops - How Long Should They Stick?

[RPSPIANO@aol.com]

  Dear Larry,

Assuming that, you planed the keys and created a good gluing surface.
That you matched the original dimension of the key with your  new material.
         Applied the contact cement to both surfaces and waited the
optimum time & used some clamping  pressure-- the keys should
stay on untill they wear out.  You did  a good job!
We have been using the PVC-E glue. It is water soluble and there is
less odor and less volatile.  The application is not so messy clean-up
is much easier.  You might want to give it a try.

Mark Ritchie RPT

Columbus, OH