On Thu, 23 May 1996 t.seay@mail.utexas.edu wrote: > Dear Pianotech list, > > I am preparing to restring a Steinway L for our School of Music over the > summer. I am wondering what procedures you might recommend for reaming > holes prior to installing new pins (or if you recommend reaming at all, > come to think of it). I will be replacing 2-0's with 4-0's. > > Many thanks, > > > Tom Seay > > > > > Tom Seay > t.seay@mail.utexas.edu > The University of Texas at Austin > > > >Tom, You will not have any promlems, doing nothing at all if you are using pins that are two sizes larger than the ones you are replacing. I have done the same with no problems at all. The best of luck!! Clark Hale chale@titan.iwu.edu > >
This PTG archive page provided courtesy of Moy Piano Service, LLC