Installing let-off buttons

[Dennis H Johnson]

=09I=D5m just wondering if anyone has figured out a easier method of=20
screwing on new let-off buttons without excessive turning of the screws. =
=20
It is simple to hold the button and screw into it, but then the screw=20
will become loose every time.  On the other hand, holding the screw still=
=20
and turning each button on by hand is very hard on the fingers, to say the=
=20
least.=09On my last job I decided to just cut off the punchings and replace=
 the=20
felt, but the new buttons are finished much better and really look=20
nice.


Dennis Johnson