Help! I need some shoptalk here. I am a piano technician. I have rebuilt a good amount of Steinways, etc. for dealerships and now am in the process of building my own shop. I have used a great type of drill press that was bench top in size and quite "low profile". It was placed on a flat surface atop the case of a grand piano and used to drill into the "pinblock" of the instrument. In other words we were able to move this drillpress from left to right along the project. It had no "table" of its own. I need to know what type of drill this is called in order to communicate with distributors. If YOU understand my description and know what I am talking about, please drop me a line. Thanks very much for reading this! Lorlin Barber, RPT
This PTG archive page provided courtesy of Moy Piano Service, LLC