>I'd like to add a suggestion re: a tool that Susan Graham used to use for >this kind of work - a specially turned piece of all thread of the right >diameter for a 25 watts soldering iron. I have several diameters for >different jobs, have used them for years, and feel that they have saved me >countless hours of working with less efficient and effective means of sizing >bushings. > I have taken the threaded rod, drilled an appropiate size hole in then and glued in a bridge pin for sizing bushings. This is a little easier then turning down the rod on a drill press. Rob Edwardsen, RPT Rochester Chapter edwardsn@rpa.net
This PTG archive page provided courtesy of Moy Piano Service, LLC