Replacing agraffes

[Kam544@aol.com]

Mark Dierauf posted:
>>...One particular question - the only replacment that I was able to find
was
threaded correctly, but the string holes are drilled about 1/32" higher than
on
the originals, which of course raises the strike point by that amount...<<

If you can't find agraffes that match the way you want, you may have to
resort to the Hollow Mill procedure as described in Chris Robinson's articles
in the PT Journal 1983, August, page 23; and 1985, June, page 21.

Keith A. McGavern, RPT
Oklahoma Chapter 731
Oklahoma Baptist University
Shawnee, Oklahoma