Samick damper action

Kam544@aol.com Kam544@aol.com
Fri, 03 Nov 1995 11:58:11 -0500


Lar, you posted:

>>...BIG DRAG!!...<<

Before repinning try using Protek lubricant in an applicator type container
with a long enough needle to reach the flange centers.  Try one and see if
magic doesn't occur.

And damper guide rail bushings could be a contributing factor to you drag as
well.

Keith A. McGavern, RPT
Oklahoma Chapter 731
Oklahoma Baptist University
Shawnee, Oklahoma


This PTG archive page provided courtesy of Moy Piano Service, LLC