Plate refinishing...

John Minor jminor@ux1.cso.uiuc.edu
Mon, 17 Oct 1994 19:39:28 -0500 (CDT)


Allen Crane writes:

  I usually remember to wash the plate
> down with lacquer thinner prior to spraying (I forgot once and had
> trouble with the gold lacquer lifting in some areas--not good!).
> Lacquer thinner is a VERY NASTY chemical to be using as a cleaner!!!!
Naptha is a much better chemical for removing any trace of wax or oil
before putting on a new finish. : )

John Minor
University of Illinois



This PTG archive page provided courtesy of Moy Piano Service, LLC