That would be fine. I already know about shank length, bore distance, the line from 72 to 88 etc.... I just want to know what the spec is on intended strike point on string #1. Sent from my iPhone On Dec 23, 2012, at 3:01 PM, Zeno Wood <zeno.wood at gmail.com> wrote: > I have an old document from Steinway with that strike point info, but I won't be near that piece of paper until early January, if you can wait... > > Regards, > Zeno Wood > >> >> On 22/12/2012 17:20, Bob Hull wrote: >> >> > Does someone know the strike point on string #1 for a Steinway M? >> > Also, if it has varied over the years, this is for a 1923 model M. >> > >> > I am building a complete new top action and want to compare that >> > measurement against the current strike line because this piano has had >> > at least one action rebuild in its history. >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/caut.php/attachments/20121223/d7adb398/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC