On Jan 9, 2011, at 11:54 AM, Ed Sutton wrote: > You could try WNG stainless steel pins. They are not the same sizes > as standard pins. they come in 5 sizes from .0500in (1.270mm) to . > 0508in (1.290mm), and may be too small for worn action centers. Really, those numbers? That would mean increments of .0002" (as opposed to .001" for half sizes in standard US pins), from 20 gauge to a little less than 20.5 gauge. On their web site I see German silver pins, standard sizes. Regards, Fred Sturm fssturm at unm.edu "Travel is fatal to prejudice, bigotry, and narrow-mindedness." Twain
This PTG archive page provided courtesy of Moy Piano Service, LLC