[CAUT] Yamaha C2 casters

[Greg Newell]

Or sticking the blade of a large flat bladed screwdriver between the wheel
and it's housing and giving the screwdriver blade a whack should do the
trick.

Greg Newell
Greg's Piano Forté
www.gregspianoforte.com
216-226-3791 (office)
216-470-8634 (mobile)


-----Original Message-----
From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Ron
Nossaman
Sent: Friday, March 12, 2010 1:44 PM
To: caut at ptg.org
Subject: Re: [CAUT] Yamaha C2 casters

Zeno Wood wrote:
> Thanks!  I tried unscrewing the socket and the thing didn't want to come 
> out.  Not an easy spot to gain leverage.  I'll give it another try.

I find that two screwdrivers (or small flat pry bars if you 
have them), one on either side, alternately prying gently left 
and right will walk them out easier than anything else I've 
found.
Ron N