> One of the issues if you do start over will be choosing a set of hammers >that will accommodate the longer bore with adequate tail length. It may >not be a Steinway stock hammer-not the worst thing. On any custom bore, I order from Ronsen and ask for extra long moldings to insure 1 1/16" tails for the entire set. With stock hammers from the suppliers, you are limited to the 'standard' bore which will leave you with many if not most tails less than 1". Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20100306/fbc43a52/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC