The resolution on the last photo wasn't good enough on the clamp jig that holds the individual hammer to be needled. Here is a better resolution of just that piece. I think it is two pieces of aluminum angle screwed to the wood, spaced appropriately. Fred DSCF0767.JPG copy -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20100605/581dfac7/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: DSCF0767_2.jpg Type: image/jpeg Size: 54934 bytes Desc: not available URL: <http://ptg.org/pipermail/caut.php/attachments/20100605/581dfac7/attachment-0001.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC