Extremely clever, Ed. Susan Kline On 12/10/2010 2:55 PM, Ed Foote wrote: > I begin by placing a blue and pink punching at the bottom of the > front pins. Then use cardboard, etc. to get a measured keydip of say, > .390"-.400". I do this with a weighted touch block. After regulating > everything but aftertouch, I go back through and using a spacer whose > thickness is the amount of aftertouch I want, (it varies from pianist > to pianist and piano to piano), and either add or subtract up to .010" > to make the aftertouch even. If that degree of change won't do it, I > will alter the hammer blow a bit from note to note to get there. It > makes the irregularity invisible.
This PTG archive page provided courtesy of Moy Piano Service, LLC