[CAUT] When to Restring..changing to agraffes

[Ron Nossaman]

Adkins, Richard wrote:
> I saw a PDF on the web this morning from Ron Overs stating
> that he makes agraffes out of hardened steel for heavy use pianos. I'm 
> not sure if he sells them, or how he sizes them, or threading specs. If 
> he would/does, then I would hope he would make some for Steinway, as 
> that is what many of us CAUTS are needing them for.

He had been electroless nickel plating brass agraffes too, for 
the harder bearing surface. This is something anyone can do.
Ron N