Hi Barbara, It's taken a couple tries to get the hang of using the stuff--I ... and just how do you use it? Alan Eder -----Original Message----- From: Barbara Richmond <piano57 at comcast.net> To: caut at ptg.org Sent: Thu, Aug 5, 2010 3:45 pm Subject: Re: [CAUT] VS pro-felt? Golly Paul, I don't think the stuff is bunk. I just resized some key bushings that weren't in bad worn, but didn't fit right, either. It sure was easy work (because I had the correct size cauls)--and I didn't have to deal with steam. It's taken a couple tries to get the hang of using the stuff--I'm glad I didn't give up. Barbara Richmond, RPT near Peoria, Illinois ----- Original Message ----- From: "Paul T Williams" <pwilliams4 at unlnotes.unl.edu> To: caut at ptg.org Sent: Thursday, August 5, 2010 3:40:03 PM Subject: Re: [CAUT] lanolin in hammers/VS pro-felt? sorry, Fred, I applied it to the felt under the leather. Of course, it "leaked" into the leather which was not theintent. Still, nothing positive happened. I think this stuffis bunk. Paul From: Fred Sturm <fssturm at unm.edu> To: caut at ptg.org Date: 08/05/2010 03:36 PM Subject: Re: [CAUT] lanolin in hammers/VS pro-felt? On Aug 5, 2010, at 2:28 PM, Paul T Williams wrote: I've never put it on leather.....whywould I? I thought you said you tried it on knuckles.Or were those the famous felt knuckles, not covered in leather? Regards, Fred Sturm fssturm at unm.edu "Travel is fatal to prejudice, bigotry,and narrow-mindedness." Twain -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20100805/98f03928/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC