HAPPY BIRTHDAY! To: caut at ptg.org From: pwilliams4 at unlnotes.unl.edu Date: Tue, 3 Aug 2010 16:48:07 -0500 Subject: Re: [CAUT] When to restring...OT 1098's...OT OT OT Pics not here yet, but no prob, will probably be by morning...I'm going home! (early day, yes!) Have a good evening y'all! Thank you again for the great info. What to do for my son's 14th birthday this weekend?? Paul From: Jim Busby <jim_busby at byu.edu> To: "caut at ptg.org" <caut at ptg.org> Date: 08/03/2010 04:42 PM Subject: Re: [CAUT] When to restring...OT 1098's Paul, The same pics Jon just sent, but Ron posted some a while back too. I’ll search for them. Jim From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Paul T Williams Sent: Tuesday, August 03, 2010 3:29 PM To: caut at ptg.org Subject: Re: [CAUT] When to restring...OT 1098's Pics, please, please please!! I hate these things! Paul! From: Jim Busby <jim_busby at byu.edu> To: "caut at ptg.org" <caut at ptg.org> Date: 08/03/2010 04:24 PM Subject: Re: [CAUT] When to restring...OT 1098's A few months back Jon and Ron suggested this and I have done it on about 5 pianos. VEEERRRYY GOOD! Rendering is so much better. It is standard procedure now. Thanks Jon and Ron! Jim Busby From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Jon Page Sent: Tuesday, August 03, 2010 3:21 PM To: caut at ptg.org Subject: Re: [CAUT] When to restring...OT 1098's The nasty mid-section strip on the card-board type stuff, though is a pain to replace! Any hints on that? Replace it with a brass half-round. Place felt fore and aft of it; thick enough to dampen but not press into it causing drag. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20100803/31f0c003/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC