You mean the guy with the lead foot busted the bottom board loose from the stretcher. I thought the stretcher was normally loose. The bottom board has to be worked on from the bottom. Tilt the piano on it's back and you will see... it's the only way to fix it. Keith Roberts On Wed, Sep 9, 2009 at 2:16 PM, David Ilvedson <ilvey at sbcglobal.net> wrote: > I worked on a Seiler studio upright a week ago and discovered the bottom > board stretcher is loose and the weight of the bottom board is pushing down > on the pedal...sustaining dampers. I had no time to investigate > further...wedged under the stretcher until I can go back with my tipper. > There were no brackets visible on the pedal board so I'm assuming it is > missing angled screws going through the stretcher into the case...? Any > other ideas? > > David Ilvedson, RPT > Pacifica, CA 94044 > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20090909/600cb43f/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC