Martin is a wonderful craftsman and a bit of a recluse. He rarely responds to email, phone or otehr communications. I did get to speak to him but only by knocking on his shop door until he answered it. I believe he gets his pins from europe though I not certain. You just have to bee persistent and patient and keep trying until you get through. I do have a few here (spares) but not many. I got them during my previous visit. You could also get them from Instrument Workshop and drill the becket holes....(Just a thought) Gerry C West Chester University of PA From: jim_busby at byu.edu To: caut at ptg.org Date: Thu, 8 Oct 2009 11:52:48 -0600 Subject: Re: [CAUT] Wrest pins Don, He’s hard to reach. I have one of his instruments. If you do find him tell me how you did it! I have people wanting an instrument like ours. Best, JB From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Donald McKechnie Sent: Thursday, October 08, 2009 11:05 AM To: caut at ptg.org Subject: [CAUT] Wrest pins Can anyone tell me where Willard Martin gets his harpsichord wrest pins? I have been trying to contact him for some time with no luck. The pins I have seen on his instruments are similar to the style available at Instrument Workshop. However, they have becket holes, are not tapered and have threads. Thought I would try this list first before going to one of the harpsichord lists. Thanks! Don Donald McKechnie Piano Technician Ithaca College dmckech at ithaca.edu 607.274.3908 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20091008/70246a39/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC