http://www.mcmaster.com/ Huge, but easily searchable online hardware catalog. Recommended to me by Del Fandrich. Dave Stocker Tumwater, WA -------------------------------------------------- From: "maxpiano" <maxpiano at sc.rr.com> Sent: Monday, June 01, 2009 5:53 PM To: <caut at ptg.org> Subject: [CAUT] Yamaha grand screws too short? > A church I serve has had the piece that holds the lock to the lid on their > Yamaha C7 pull loose. (I know, I know--after 50+ years tuning, I should > know the name of the piece. The book on nomenclature is next on my list > to get). I have never run up against this before. But the screws (2 > 7/16" flat head brass--#12?) do not protrude much into the lid and I'm > wondering how well my standard fix for stripped screw holes (leather > lining the hole) will hold unless I can find a slightly longer screw. Is > any such screw available -- perhaps 1/8" longer? I fear the point > pricking the finish of the other side if I go too long. > > Bill Maxim > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC